Sale!

Micro Octo Frames

$14.00$15.00

2 different micro Octo frame sizes are currently available in clear Polycarbonate with integrated 8.5mm motor mounts.  Following the trend of the integrated series these frames feature slots and cutouts to allow installation of 3mm LEDs directly into the frame. 2-56 threaded holes are also included next to each motor mount, allowing included 2-56 screws to be threaded into the frame to act as a landing skid and also help protect the bottom of each motor.  8 clear micro rubber bands are also included to help secure motor wires to each frame.

Please note limited flight controller options are currently available for micro brushed Octo configurations. Many Quadcopter Flight controllers are capable of driving 8 motors (2 from each channel), however larger or doubbled FETs may be needed to handle the the additional motors.   New options are on the horizon, however in the meantime please ensure available flight controller options are considered before purchasing a micro Octo frame.

 

Clear
SKU: N/A Category:

Description

Frame weights below do not include the 8 included 2-56 screws or micro rubber bands.
A set of 8, 1″ long screws weigh approximately 0.65 grams and when trimmed down to 1/2″ approximately 0.35 grams.
A set of 8 micro rubber bands weigh approximately 0.08 grams.

The Octo 160 offers a symmetrical configuration with clearance for up to 60mm propellers.
Micro Octo 170 Integrated 8.5mm Frame Weight: approximately 13.2 grams

The Octo 178 is offers a symmetrical configuration with clearance for up to 66mm propellers.
Micro Octo 170 Integrated 8.5mm Frame Weight: approximately 15.4 grams

Additional configurations are currently under development.

Frame Notes:
Frame Size: Refers to approximate distance diagonally between motor centers.

Octo frames are manufactured from 1/8″ thick clear Polycarbonate material.